Main:+86 574 87907106
[email protected]
Custom CNC machining And Precision Castings Manufacturers
1. How to choose tools for precision machining?If the tool is wrongly selected, the machining process will definitely be wrong, or some parts cannot be machined directly. If there is a deviation in tool selection, the pr...
The 4 major characteristics of custom precision machining parts are:First, high quality. To achieve the high quality of precision machining, the processing material itself must be of good quality and stability, and the...
The surface processing method of CNC machined parts firstly depends on the technical requirements of the machined surface. However, it should be noted that these technical requirements are not necessarily the requirement...
1: Reduce the number of tooling greatly, because CNC machining is mainly processed by programming, and CNC has three axes, four axes, and five axes. Compared with other ordinary machining equipment, processing parts with...
Leaks that may occur in pneumatic control valves:(1) Valve leakageDue to the improper length of the valve stem, the upper and lower parts of the valve stem are too short, resulting in incomplete contact between the valv...
The main components of the pneumatic control valve： 1. Pressure reducing valve: reduce the pressure of the control air source to suit the working pressure of the actuator; 2. Filter: Filter out the water and other impu...
Main:+86 574 87907106
Main:+86 574 87907106
